Macally Rechargeable Bluetooth Optical Mouse - White
The Macally BTTOPBAT is a rechargeable Bluetooth wireless optical mouse with an 800/1200/1600 DPI switch button, two soft-click buttons and a scroll wheel/button for precise and smooth control. The ergonomic and ambidextrous design offers maximum comfort to both left-handed and right-handed users and helps to increase productivity. The 300mAh built-in rechargeable battery will power the BTTOPBAT for up to 2-3 months before the next charging is required.* No need to buy and replace batteries anymore! The BTTOPBAT works both with Mac and PC and doesn’t require any driver.
Features:
- 800/1200/1600 DPI switch button to adjust sensitivity for more precise control
- Silent soft-click buttons and scroll wheel for silent and smooth control
- Stylish matte, slim and ambidextrous design
- Bluetooth wireless connectivity up to 10 m (30 ft)
- Built-in 300mAh rechargeable Lithium-Ion battery lasts up to 1-2 months of use (at 8 hours of daily use)*
- On/Off switch to save energy
System Requirements:
- Bluetooth enabled computer; Mac OS X 10.6 and later;
- Microsoft Windows 7/8/10;
- iOS/iPadOS 13.0 and later;
- Android 6.0 and later
Set Up / Installation:
The Macally BTTOPBAT does not require a driver, only a Bluetooth enabled computer with Mac OS X v10.6 and later or Microsoft Windows 7 / 8 / 10. Simply follow the steps below and you are ready to go!
Pairing the mouse with a Mac
- To connect the Bluetooth mouse to your computer, bring it within 1 ft /25 cm range from your computer.
- In your Mac, open ‘Bluetooth’ in ‘System preferences’. Make sure Bluetooth is On.
- Then, turn on the mouse, press and hold down the Pair button for 2 seconds, pairing light flashes blue in the DPI switch button.
- 'Bluetooth Mouse’ will appear in the list of Bluetooth Devices. Please click on ‘Connect’.
- When 'Bluetooth Mouse’ shows connected, you are ready to use the BTTOPBAT.
Pairing the mouse with Windows PC
- To connect the Bluetooth mouse to your computer, bring it within 1 ft/25 cm range from your computer.
- In your Windows PC, go to ‘Devices and Printers’ and select ‘Bluetooth Devices’. Make sure Bluetooth is On.
- Then, turn on the mouse, press and hold down the Pair button for 2 seconds, pairing light flashes blue in the DPI switch button.
- Click ‘Add a device’ at the top left corner.
- 'Bluetooth Mouse’ will appear, please select it and press ‘Next’.
- After a short period, Windows will show a screen indicating that the mouse is paired with the computer. You are ready to use the BTTOPBAT.