Counterpoint only sell to schools and businesses. Message or Call us on 01903 538 844 with any questions.

Share +
Microphone - Audio Technica ATW11/P One Beltpack System With ATR35CW
Microphone - Audio Technica ATW11/P One Beltpack System With ATR35CW
Microphone - Audio Technica ATW11/P One Beltpack System With ATR35CW

Audio Technica ATW11/P One Beltpack System with ATR35CW

  • SKU: W-MIB579G
Price Match

Audio Technica ATW11/P One Beltpack System with ATR35CW


AT-One, Audio-Technica’s entry-level UHF wireless system. With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, AT-One is ready to become your perfect wireless companion.

AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antennae, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry-level price. The AT-One’s frequency plan is divided into two groups with 4 available channels in each group split between the Europe wide license-free frequency range and the LTE duplex gap. Users can choose up to 4 channels within one group.

Available in three configurations, AT-One can be purchased with a belt pack or handheld transmitter. The ATW-11/P comes equipped with the ATR35cW tie-clip microphone.

  • Designed for quick and easy use
  • The perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices
  • The frequency plan of AT-One is divided into two groups with 4 channels available in each group, one in the range of authorized European frequencies and the other in the duplex Gap
  • Users can choose up to 4 channels in a group
  • The ATW-11 system is equipped with a discreet and robust pocket transmitter
  • RF Transmitting power 10mW
  • Comes with an ATR35cW miniature omnidirectional condenser microphone
  • Up to 10 hours' battery life with 2 x 1.5V AA batteries
  • RF Indicator light
  • Robust construction from high-quality components
  • Delivered in a transport case with a rack mount kit and detachable antennas

2 X 4 Channels
AT-One's frequency plan is divided into two groups, each with 4 channels available, one in the range of authorized European frequencies and the other in the duplex gap. Users can choose up to 4 channels in a group.

RF Light Indicator
The display on the half-rack receiver clearly indicates both the RF and AF levels.

12V Power
The ATW-R1 receiver delivers a voltage of 12V / 100 mA for powering an ATW-B80 booster antenna, active splitters, an antenna combiner or any other active component.

Delivered in a Case
The AT-One comes with an ATW-R1 receiver, an ATW-T1 pocket transmitter, detachable antennas, a rack-mount kit, and a power supply, all in a hard carrying case.

Easy to Use
The AT-One has been conceived and designed for quick and easy use. Simply open the carrying case, connect, and your UHF wireless system is immediately operational.

Micro-Omni Lavalier Microphone
The AT-One AT-11/P system comes with an ATR35cW omnidirectional lavalier microphone, to provide precise and intelligible speech quality.

Removable Antennae
The antennae of the AT-One wireless system are detachable, which alternatively allows remote operation via a single BNC cable.


Overall System
  • Operating Frequencies: F-Band: 824 - 831 MHz, 863 - 865 MHz
  • Modulation Mode: FM
  • Frequency Response: 60 Hz - 16 kHz
  • Frequency Stability: +/- 0.005%, Phase lock loop frequency control
  • Operating Range: 60m, typical
  • Number Of Channels: 2 x 4 frequencies
Body Pack
  • RF Power Output: 10 mW
  • Battery Life: 10 hours - depending on battery type and use pattern
  • Battery Type: Two 1.5V AA alkaline (not included)
  • Dimensions: 66 mm x 98 mm x 22 mm (W x H x D)
  • Input Connections: Pin 1: GND, Pin 2: INST, Pin 3: Mic, Pin 4: DC Bias +10V
  • Spurious Emissions: Following national regulations
  • Receiving System: Antenna switching diversity
  • Image Rejection: 55dB minimum
  • Sensitivity: 10dBµV (S/N 60dB @ 20 kHz deviation)
  • Maximum Output Level: Mic / Line (0 / -20dB)
  • Antenna Input: BNC type, 50 - BIAS voltage 12V DC 100mA each
  • Dimensions: 200 mm x 42 mm x 122 mm (W x H x D)
  • Weight: 418 g without accessories
  • Accessories Included: AC Adapter, Antennas, Rack mount adapter, protective carrying case
  • Audio Output Balanced: 4dBV
  • Audio Output Unbalanced: -2dBV
  • Dynamic Range: HH: 108 dB, BP 103 dB (@ max deviation)
  • Output Connectors (Instrument): Unbalanced: 6.3 mm mono jack
  • Output Connectors (Microphone): Balanced: XLRM-type
  • Total Harmonic Distortion: <1% - 20 kHz deviation @ 1 kHz

Related Products

Want to find out more?

If you are interested in any of our services, such as Apple device management, or would like to chat about your current infrastructure set up, we would love to hear from you.


Lowest Price

We're committed to price matching our products, however if you find a lower price we’re committed to price matching for you - simply email us to request a price match.


100-day returns

We want you to feel reassured that the products you buy from us are built to last for the classroom, in the office or on the road. That’s why we have a 100-day guarantee where you can return the product if anything you buy from us develops a fault within 100-days.
Different rules apply to our Built-to-order products, read more on our Terms and Conditions.
Our products are hand-selected and built to last.


Expert advice

Our qualified engineers are available to answer any questions you may have. If you have a technical question or need some help with something specific, do not hesitate to reach out. We’re here to help.