Audio-Technica AT-LP3 Turntable - White

The brand new AT-LP3 turntable is unique, revolutionary turntable from Audio-Technica. Heralded for their recent high-end turntables like the AT-LP120 and AT-LP5 turntables, Audio-Technica is back with a new turntable aimed squarely at new users looking to delve into the world of vinyl! Enter the AT-LP3 - a fully-automated, mid-range turntable with some surprisingly high-end features. A high-talk variable speed motor accommodates both 33 1/3 & 45 speeds while a high-density anti-resonance platter works to reduce feedback and colouration of the tone. A straight tonearm comes with the AT91R cartridge pre-installed but advanced users can experiment with both moving magnet and moving coil cartages if they so wish. An in-built phono pre-amp negates the need for additional, expensive external preamps making the AT-LP3 the ideal choice for both enthusiasts and vinyl newcomers alike. Also available in Black!

Unsure as to whether the AT-LP3 is compatible with your existing system? Why not call our Leeds showroom on 0113 880 0138 and speak to a member of our technical team today!

Turntable Specifications

• Type Fully Automatic, Belt-Drive
• Motor DC motor
• Speeds 33-1/3 RPM, 45 RPM
• Turntable Platter Die-cast aluminium
• Wow and Flutter Less than 0.2% WRMS (33 1/3 RPM) at3kHz
• Signal-to-Noise Ratio > 60 dB
• Output Level "PHONO" (MM) 3.5mV nominal at 1kHz, 5cm/sec
• "LINE" (MC) 220mV nominal at 1kHz, 5cm/sec
• Phono Pre-Amp Gain 36dB nominal, RIAA equalised
• 56dB nominal, RIAA equalised
• Power Supply Requirements 220 to 240 V / 50, 60 Hz
• Power Consumption 2W
• Colour White
• Dimensions 435 mm x 353 mm x 128 mm (WxDxH)
• Weight 5.2kg
• Accessories Included Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable

Cartridge & Stylus Specifications

• Model AT91R
• Type VM Dual Magnet
• Output Voltage 3.5mV (mV at 1kHz, 5 cm/sec)
• Vertical Tracking Force Range 1.5 to 2.5g (standard 2.0g)
• Stylus Construction 0.6 mil bonded conical
• Cantilever Aluminium pipe
• Recommended Load Impedance 47,000 ohms
• Weight 5.0g
• Headshell
• Model AT-HS3
• Weight 11.1g
• Overhang Adjustment 8mm

Tone arm Specifications

• Type Static balanced straight shaped with soft damping control
• Effective Length 221.5mm
• Overhang 19mm
• Maximum Tracking Error Angle Less than 3°
• Stylus Pressure Adjustment Range 1 to 4g
• Applicable Cartridge Weight 14.5 to 20g
• Anti-skating Range 0 - 3 g