Audio-Technica AT-LP3 Turntable
The new AT-LP3 from Audio-Technica is a fully-automated belt-driven turntable with a revolutionary dual-state design that allows for both moving coil and moving coil cartridges. The AT-LP3 features a die-cast aluminium platter with a DC motor which caters to both 45 and 33-1/3 revolutions per minute. The included AT91R VM Dual Magnet cartridge comes pre-mounted to a Aluminium die-cast headshell which is, in turn, mounted to the 'straight-shape' balanced tonearm. The AT91R provides superb channel separation and strikes a superb balance between tonal quality and value for money. The AT-LP3s built-in pre-amp makes it an ideal solution for those making their first steps into vinyl given that no additional equipment is needed aside from a standard HIFI setup.
Unsure as to whether the AT-LP3 is compatible with your existing system? Why not call our Leeds showroom on 0113 880 0138 and speak to a member of our technical team today!
Turntable Specifications
-
Type Fully Automatic, Belt-Drive
-
Motor DC motor
-
Speeds 33-1/3 RPM, 45 RPM
-
Turntable Platter Die-cast aluminium
-
Wow and Flutter Less than 0.2% WRMS (33 1/3 RPM) at3kHz
-
Signal-to-Noise Ratio > 60 dB
-
Output Level "PHONO" (MM) 3.5mV nominal at 1kHz, 5cm/sec
- "LINE" (MC) 220mV nominal at 1kHz, 5cm/sec
-
Phono Pre-Amp Gain 36dB nominal, RIAA equalised
- 56dB nominal, RIAA equalised
-
Power Supply Requirements 220 to 240 V / 50, 60 Hz
-
Power Consumption 2W
-
Dimensions 435 mm x 353 mm x 128 mm (WxDxH)
-
Weight 5.2kg
-
Accessories Included Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable
Cartridge & Stylus Specifications
-
Model AT91R
-
Type VM Dual Magnet
-
Output Voltage 3.5mV (mV at 1kHz, 5 cm/sec)
-
Vertical Tracking Force Range 1.5 to 2.5g (standard 2.0g)
-
Stylus Construction 0.6 mil bonded conical
-
Cantilever Aluminium pipe
-
Recommended Load Impedance 47,000 ohms
-
Weight 5.0g
- Headshell
-
Model AT-HS3
-
Weight 11.1g
-
Overhang Adjustment 8mm
Tone arm Specifications
-
Type Static balanced straight shaped with soft damping control
-
Effective Length 221.5mm
-
Overhang 19mm
-
Maximum Tracking Error Angle Less than 3°
-
Stylus Pressure Adjustment Range 1 to 4g
-
Applicable Cartridge Weight 14.5 to 20g
-
Anti-skating Range 0 - 3 g